English Polski
Tools For Metals
End Mills & Drill Bits for metals:
  • Standard End Mills, Roughing End Mills, Finishing End Mills
  • Ball Nose End Mills, Chamfering End Mills, Corner Rounding End Mills
  • Straight Flutes Drill Bits for Hard Metals, Spiral Drill Bits
Full line tools for metals as below:
  • End Mills for Carbon, Stainless & Hardened Steel, End Mills for Aluminium
Sign In

Cast Iron - VHM Cutting Tools - End-mills, Drill Bits, Centre Drills for Cast Iron

End Mills 1.5D for Cast Iron - OSG WXL 1.5D

End Mills 1.5D for Cast Iron - OSG WXL 1.5D
Geometry - 2 flute short 1.5D
Helix angle - 30°
Flute diameter - 0.1÷6 mm
Shank diameter - 4÷6 mm
Depth Of Cut - 0.15÷9 mm
Overall Length - 45÷50 mm

End Mills 2D for Cast Iron - OSG WXL 2D

End Mills 2D for Cast Iron - OSG WXL 2D
Geometry - 2 flute short 2D
Helix angle - 30°
Flute diameter - 0.1÷20 mm
Shank diameter - 4÷20 mm
Depth Of Cut - 0.2÷40 mm
Overall Length - 45÷100 mm

End Mills 3D for Cast Iron - OSG WXL 3D

End Mills 3D for Cast Iron - OSG WXL 3D
Geometry - 2 flute 3D
Helix angle - 35°
Flute diameter - 0.1÷20 mm
Shank diameter - 4÷20 mm
Depth Of Cut - 0.2÷60 mm
Overall Length - 45÷130 mm

End Mills 4D for Cast Iron - OSG WXL 4D

End Mills 4D for Cast Iron - OSG WXL 4D
Geometry - 2 flute short 4D
Helix angle - 40°
Flute diameter - 0.2÷12 mm
Shank diameter - 4÷12 mm
Depth Of Cut - 0.8÷48 mm
Overall Length - 45÷100 mm

4-flute End-mills for Cast Iron

4-flute End-mills for Cast Iron
Geometry - 4 flute short
Helix angle - 30°
Flute diameter - 1÷30 mm
Shank diameter - 4÷32 mm
Depth Of Cut - 2.5÷45 mm
Overall Length - 40÷125 mm

End-mills with Long Neck for Cast Iron

End-mills with Long Neck for Cast Iron
Geometry - 2 flute short, long neck
Helix angle - 30°
Flute diameter - 0.2÷5 mm
Shank diameter - 4÷6 mm
Depth Of Cut - 0.3÷7.5 mm
Overall Length - 45÷110 mm

Ball Nose End-Mills for Cast Iron

Ball Nose End-Mills for Cast Iron
Geometry - 2 flute, ball nose
Flute diameter - 0.1÷20 mm
Shank diameter - 4÷6 mm
Depth Of Cut - 0.2÷38 mm
Overall Length - 40÷160 mm

Long Neck Ball Nose End-Mills for Cast Iron

Long Neck Ball Nose End-Mills for Cast Iron
Geometry - 2 flute, ball nose, long neck
Flute diameter - 0.1÷6 mm
Shank diameter - 4÷6 mm
Depth Of Cut - 0.08÷6 mm
Overall Length - 45÷120 mm

Long Standard End-mills for Cast Iron

Long Standard End-mills for Cast Iron
Geometry - 2, 3, 4-flute
Helix angle - 30°
Chamfer of edge - 0.05÷0.35 mm
Flute diameter - 3÷20 mm
Shank diameter - 6÷20 mm
Depth Of Cut - 8÷55 mm
Overall Length - 57÷160 mm

Short Standard End-mills for Cast Iron

Short Standard End-mills for Cast Iron
Geometry - 2, 4-flute
Helix angle - 35°, 45°
Chamfer of edge - 0÷0.35 mm
Flute diameter - 1÷20 mm
Shank diameter - 4÷20 mm
Depth Of Cut - 3÷38 mm
Overall Length - 50÷105 mm

Roughing End-mills for Cast Iron

Roughing End-mills for Cast Iron
Geometry - 4-flute variable helix
Helix angle - ~45°
Chamfer of edge - 0.1÷0.35 mm
Flute diameter - 6÷20 mm
Shank diameter - 6÷20 mm
Depth Of Cut - 13÷35 mm
Overall Length - 57÷160 mm

Roughing Chip Breaker Bits for Cast Iron

Roughing Chip Breaker Bits for Cast Iron
Geometry - 4-flute
Helix angle - 30°
Chamfer of edge - 0.5÷1.0 mm
Flute diameter - 6÷20 mm
Shank diameter - 6÷20 mm
Depth Of Cut - 13÷38 mm
Overall Length - 57÷105 mm

Asymmetric Finishing End-mills for Cast Iron

Asymmetric Finishing End-mills for Cast Iron
Geometry - 6-flute variable helix
Helix angle - ~45°
Chamfer of edge - 0÷0.15 mm
Flute diameter - 6÷20 mm
Shank diameter - 6÷20 mm
Depth Of Cut - 19÷90 mm
Overall Length - 57÷160 mm

Ball Nose End-mills for Cast Iron Profiling

Ball Nose End-mills for Cast Iron Profiling
Geometry - 2, 4-flute, ball nose
Helix angle - 30°
Flute radius - 0.5÷10 mm
Flute diameter - 1÷20 mm
Shank diameter - 4÷20 mm
Depth Of Cut - 2÷55 mm
Overall Length - 50÷160 mm

Radius on a Corner End-mills for Cast Iron

Radius on a Corner End-mills for Cast Iron
Geometry - 2, 4-flute, radius on a corner
Helix angle - 35°, 45°
Corner radius - rn - 0.5÷2 mm
Flute diameter - 2÷20 mm
Shank diameter - 3÷20 mm
Depth Of Cut - 5÷38 mm
Overall Length - 50÷105 mm

Chamfering End-mills for Cast Iron

Chamfering End-mills for Cast Iron
Geometry - 3, 4-flute, V-point
Tip angle - 60°, 90°
Flute diameter - 6÷12 mm
Shank diameter - 6÷12 mm
Depth Of Cut - 3÷10.4 mm
Overall Length - 57÷82 mm

Corner Rounding End-mills for Cast Iron

Corner Rounding End-mills for Cast Iron
Geometry - 4-flute, corner rounding
Flute radius - 0.5÷6 mm
Flute diameter - 6÷8 mm
Shank diameter - 8÷20 mm
Depth Of Cut - 0.5÷6 mm
Overall Length - 70÷80 mm

Centre Drills for Cast Iron

Centre Drills for Cast Iron
Flute geometry - 2-flute
Tip geometry - V-point
Tip angle - 90°, 120°
Flute diameter - 6÷20 mm
Shank diameter - 6÷20 mm
Depth Of Cut - 13÷35 mm
Overall Length - 50÷100 mm

Drill Bits for Cast Iron Spiral 3D

Drill Bits for Cast Iron Spiral 3D
Geometry - 2-flute 3xD, drill point
Point angle - 140°
Flute diameter - 3÷16 mm
Shank diameter - 6÷16 mm
Depth Of Cut - 15÷45 mm
Overall Length - 62÷115 mm

Drill Bits for Cast Iron Spiral 5D

Drill Bits for Cast Iron Spiral 5D
Geometry - 2-flute 5xD, drill point
Cooling - inner coolant
Point angle - 140°
Flute diameter - 3÷16 mm
Shank diameter - 6÷16 mm
Depth Of Cut - 24÷63 mm
Overall Length - 66÷133 mm

Drill Bits for Cast Iron Spiral 8D

Drill Bits for Cast Iron Spiral 8D
Geometry - 2-flute 8xD, drill point
Cooling - inner coolant
Point angle - 140°
Flute diameter - 3÷16 mm
Shank diameter - 6÷16 mm
Depth Of Cut - 28÷122 mm
Overall Length - 70÷192 mm

Drill Bits for Cast Iron Spiral 3-flute 5D

Drill Bits for Cast Iron Spiral 3-flute 5D
Geometry - 3-flute 5xD, drill point
Point angle - 130°
Flute diameter - 5÷16 mm
Shank diameter - 6÷16 mm
Depth Of Cut - 28÷122 mm
Overall Length - 82÷133 mm

Drill Bits for Cast Iron Straight Flute 5D

Drill Bits for Cast Iron Straight Flute 5D
Geometry - 2-flute straight 5xD, drill point
Cooling - inner coolant
Point angle - 130°
Flute diameter - 5÷16 mm
Shank diameter - 6÷16 mm
Depth Of Cut - 28÷122 mm
Overall Length - 82÷133 mm

Drill Bits for Cast Iron Straight Flute 8D

Drill Bits for Cast Iron Straight Flute 8D
Geometry - 2-flute straight 8xD, drill point
Cooling - inner coolant
Point angle - 130°
Flute diameter - 5÷16 mm
Shank diameter - 6÷16 mm
Depth Of Cut - 46÷120 mm
Overall Length - 98÷193 mm

Drill Bits for Cast Iron Straight Flute 12D

Drill Bits for Cast Iron Straight Flute 12D
Geometry - 2-flute straight 12xD, drill point
Cooling - inner coolant
Point angle - 130°
Flute diameter - 5÷16 mm
Shank diameter - 6÷16 mm
Depth Of Cut - 68÷184 mm
Overall Length - 121÷260 mm