English Polski
Tools For Metals
End Mills & Drill Bits for metals:
  • Standard End Mills, Roughing End Mills, Finishing End Mills
  • Ball Nose End Mills, Chamfering End Mills, Corner Rounding End Mills
  • Straight Flutes Drill Bits for Hard Metals, Spiral Drill Bits
Full line tools for metals as below:
  • End Mills for Carbon, Stainless & Hardened Steel, End Mills for Aluminium
Sign In

Copper Alloy - OSG WXL Coating END MILL Series for Copper Alloy

End Mills 1.5D for Copper - OSG WXL 1.5D

End Mills 1.5D for Copper - OSG WXL 1.5D
Geometry - 2 flute short 1.5D
Helix angle - 30°
Flute diameter - 0.1÷6 mm
Shank diameter - 4÷6 mm
Depth Of Cut - 0.15÷9 mm
Overall Length - 45÷50 mm

End Mills 2D for Copper - OSG WXL 2D

End Mills 2D for Copper - OSG WXL 2D
Geometry - 2 flute short 2D
Helix angle - 30°
Flute diameter - 0.1÷20 mm
Shank diameter - 4÷20 mm
Depth Of Cut - 0.2÷40 mm
Overall Length - 45÷100 mm

End Mills 3D for Copper - OSG WXL 3D

End Mills 3D for Copper - OSG WXL 3D
Geometry - 2 flute 3D
Helix angle - 35°
Flute diameter - 0.1÷20 mm
Shank diameter - 4÷20 mm
Depth Of Cut - 0.2÷60 mm
Overall Length - 45÷130 mm

End Mills 4D for Copper - OSG WXL 4D

End Mills 4D for Copper - OSG WXL 4D
Geometry - 2 flute short 4D
Helix angle - 40°
Flute diameter - 0.2÷12 mm
Shank diameter - 4÷12 mm
Depth Of Cut - 0.8÷48 mm
Overall Length - 45÷100 mm

End Mills 4-flute for Copper - OSG WXL-EMS

End Mills 4-flute for Copper - OSG WXL-EMS
Geometry - 4 flute short
Helix angle - 30°
Flute diameter - 1÷30 mm
Shank diameter - 4÷32 mm
Depth Of Cut - 2.5÷45 mm
Overall Length - 40÷125 mm

End Mills with Long Neck for Copper - OSG WXL-LN-EDS

End Mills with Long Neck for Copper - OSG WXL-LN-EDS
Geometry - 2 flute short, long neck
Helix angle - 30°
Flute diameter - 0.2÷5 mm
Shank diameter - 4÷6 mm
Depth Of Cut - 0.3÷7.5 mm
Overall Length - 45÷110 mm

Ball Nose End Mills for Copper - WXL-EBD

Ball Nose End Mills for Copper - WXL-EBD
Geometry - 2 flute, ball nose
Flute diameter - 0.1÷20 mm
Shank diameter - 4÷6 mm
Depth Of Cut - 0.2÷38 mm
Overall Length - 40÷160 mm

Ball Nose End Mills with Neck for Copper - WXL-LN-EBD

Ball Nose End Mills with Neck for Copper - WXL-LN-EBD
Geometry - 2 flute, ball nose, long neck
Flute diameter - 0.1÷6 mm
Shank diameter - 4÷6 mm
Depth Of Cut - 0.08÷6 mm
Overall Length - 45÷120 mm