English Polski
Tools For Metals
End Mills & Drill Bits for metals:
  • Standard End Mills, Roughing End Mills, Finishing End Mills
  • Ball Nose End Mills, Chamfering End Mills, Corner Rounding End Mills
  • Straight Flutes Drill Bits for Hard Metals, Spiral Drill Bits
Full line tools for metals as below:
  • End Mills for Carbon, Stainless & Hardened Steel, End Mills for Aluminium
Sign In

All-Purpose End-mills - Standard End-mills for Metal Cutting

End-mills 2-flute Short 1.5D - OSG WXL 1.5D

End-mills 2-flute Short 1.5D - OSG WXL 1.5D
Geometry - 2 flute short 1.5D
Helix angle - 30°
Flute diameter - 0.1÷6 mm
Shank diameter - 4÷6 mm
Depth Of Cut - 0.15÷9 mm
Overall Length - 45÷50 mm

End-mills 2-flute Short 2D - OSG WXL 2D

End-mills 2-flute Short 2D - OSG WXL 2D
Geometry - 2 flute short 2D
Helix angle - 30°
Flute diameter - 0.1÷20 mm
Shank diameter - 4÷20 mm
Depth Of Cut - 0.2÷40 mm
Overall Length - 45÷100 mm

End-mills 2-flute 3D - OSG WXL 3D

End-mills 2-flute 3D - OSG WXL 3D
Geometry - 2 flute 3D
Helix angle - 35°
Flute diameter - 0.1÷20 mm
Shank diameter - 4÷20 mm
Depth Of Cut - 0.2÷60 mm
Overall Length - 45÷130 mm

End-mills 2-flute 4D - OSG WXL 4D

End-mills 2-flute 4D - OSG WXL 4D
Geometry - 2 flute 4D
Helix angle - 40°
Flute diameter - 0.2÷12 mm
Shank diameter - 4÷12 mm
Depth Of Cut - 0.8÷48 mm
Overall Length - 45÷100 mm

End-mills 4-flute short - OSG WXL-EMS

End-mills 4-flute short - OSG WXL-EMS
Geometry - 4 flute short
Helix angle - 30°
Flute diameter - 1÷30 mm
Shank diameter - 4÷32 mm
Depth Of Cut - 2.5÷45 mm
Overall Length - 40÷125 mm

End-mills with Long Neck - OSG WXL-LNS-EDS

End-mills with Long Neck - OSG WXL-LNS-EDS
Geometry - 2 flute short, long neck
Helix angle - 30°
Flute diameter - 0.2÷5 mm
Shank diameter - 4÷6 mm
Depth Of Cut - 0.3÷7.5 mm
Overall Length - 45÷110 mm

End-mills Long 2/3/4-flute - F2O30

End-mills Long 2/3/4-flute - F2O30
Geometry - 2, 3, 4-flute
Helix angle - 30°
Chamfer of edge - 0.05÷0.35 mm
Flute diameter - 3÷20 mm
Shank diameter - 6÷20 mm
Depth Of Cut - 8÷55 mm
Overall Length - 57÷160 mm

End-mills Long 2/4-flute - F2O35

End-mills Long 2/4-flute - F2O35
Geometry - 2, 4-flute
Helix angle - 35°, 45°
Chamfer of edge - 0÷0.35 mm
Flute diameter - 1÷20 mm
Shank diameter - 4÷20 mm
Depth Of Cut - 3÷38 mm
Overall Length - 50÷105 mm