METAL MACHINING TOOLS

METAL TOOLS APPLICATIONS

METALTOOLS SEARCH

Cutter Diameter:

Shank Diameter:

Depth Of Cut:

Tool Length:

Validation Services

Metal Machining Tools - Solid Carbide End-Mills, Drill Bits, Centre Drills

General Purpose End-mills

Geometry - 2, 3, 4-flute
Helix angle - λ - 30°, 35°, 45°
Chamfer of edge - Fn x45° - 0.05÷0.35 mm
Flute diameter - d1 - 1÷20 mm
Shank diameter - d2 - 4÷20 mm
Depth Of Cut - l2 - 3÷55 mm
Overall Length - l1 - 50÷160 mm
Material - VHM
Coating - PVD

go to General Purpose End-mills

Roughing End-mills

Geometry - 4-flute variable, 4-flute
Helix angle - λ - 30°, ~45°
Chamfer of edge - Fn x45° - 0.1÷1 mm
Flute diameter - d1 - 6÷20 mm
Shank diameter - d2 - 6÷20 mm
Depth Of Cut - l2 - 13÷38 mm
Overall Length - l1 - 57÷160 mm
Material - VHM
Coating - PVD

go to Roughing End-mills

Finishing End-mills

Geometry - 4, 6, 8, 10, 12, 16-flute
Helix angle - λ - 30°, 35°, ~45°, 50°
Chamfer of edge - Fn x45° - 0÷0.2 mm
Flute diameter - d1 - 1÷20 mm
Shank diameter - d2 - 4÷20 mm
Depth Of Cut - l2 - 1.5÷90 mm
Overall Length - l1 - 50÷160 mm
Material - VHM
Coating - PVD

go to Finishing End-mills

Ball Nose End-mills

Geometry - 2-flute, ball nose
Helix angle - λ - 20°, 30°, 35°
Flute radius - r - 0.5÷8 mm
Flute diameter - d1 - 1÷20 mm
Shank diameter - d2 - 4÷20 mm
Depth Of Cut - l2 - 1.5÷55 mm
Overall Length - l1 - 50÷160 mm
Material - VHM
Coating - PVD

go to Ball Nose End-mills

Radius on a Corner End-mills

Geometry - 2, 4, 6-flute, radius on a corner
Helix angle - λ - 35°, 45°, 50°
Corner radius - rn - 0.2÷2 mm
Flute diameter - d1 - 2÷20 mm
Shank diameter - d2 - 3÷20 mm
Depth Of Cut - l2 - 5÷38 mm
Overall Length - l1 - 50÷105 mm
Material - VHM
Coating - PVD

go to Radius on a Corner End-mills

Torus End-mills

Geometry - 2-flute, torus
Helix angle - λ - 30°
Corner radius - r - 1.5÷3 mm
Flute diameter - d1 - 6÷12 mm
Shank diameter - d2 - 6÷12 mm
Depth Of Cut - l2 - 8÷14 mm
Overall Length - l1 - 100÷105 mm
Material - VHM
Coating - PVD

go to Torus End-mills

Chamfering End-mills

Geometry - 2, 3-flute, V-point
Tip angle - KO - 60°, 90°
Flute diameter - d1 - 6÷12 mm
Shank diameter - d2 - 6÷12 mm
Depth Of Cut - l2 - 3÷10.4 mm
Overall Length - l1 - 57÷82 mm
Material - VHM
Coating - PVD

go to Chamfering End-mills

Corner Rounding End-mills

Geometry - 4-flute, corner rounding
Flute radius - r - 0.5÷6 mm
Flute diameter - d1 - 6÷8 mm
Shank diameter - d2 - 8÷20 mm
Depth Of Cut - l2 - 0.5÷6 mm
Overall Length - l1 - 70÷80 mm
Material - VHM
Coating - PVD

go to Corner Rounding End-mills

Centre Drills

Geometry - 2-flute, V-point
Tip angle - KO - 90°, 120°
Flute diameter - d1 - 6÷20 mm
Shank diameter - d2 - 6÷20 mm
Depth Of Cut - l2 - 13÷35 mm
Overall Length - l1 - 50÷100 mm
Material - VHM
Coating - PVD

go to Centre Drills

Spiral Drill Bits for Metals

Geometry - 2-flute 3xD, 5xD, 8xD
Cooling - inner coolant
Point angle - 130°, 140°
Flute diameter - d1 - 3÷16 mm
Shank diameter - d2 - 6÷16 mm
Depth Of Cut - l2 - 15÷122 mm
Overall Length - l1 - 62÷192 mm
Material - VHM
Coating - PVD

go to Spiral Drill Bits

Straight Flutes Drill Bits for Metals

Geometry - 2-flute straight 5xD, 8xD, 12xD
Cooling - inner coolant
Point angle - 130°
Flute diameter - d1 - 3÷16 mm
Shank diameter - d2 - 3÷16 mm
Depth Of Cut - l2 - 16÷184 mm
Overall Length - l1 - 38÷260 mm
Material - VHM
Coating - PVD

go to Straight Flutes Drill Bits