Translate
PCB Processing
Dry-Film Processing
Lamination
Laminators
Hot-roll Office/School
Hot-roll Shop/Lab
Modulam A3 Compact
Double-Sided Adapters
Films and Consumables
Photoresist
Soldermask
Electroplating
Hole Wall Activation
Drilling, Milling and Routing
Drill Bits
End-Mills
Router Bits
Mechanical Etching Bits
Countersink Bits
Collets / Nuts / Toolholders
Dry-Film ProcessingLaminationLaminatorsHot-roll Office/SchoolHot-roll Shop/LabModulam A3 CompactDouble-Sided AdaptersFilms and ConsumablesPhotoresistSoldermaskElectroplatingHole Wall ActivationDrilling, Milling and RoutingDrill BitsEnd-MillsRouter BitsMechanical Etching BitsCountersink BitsCollets / Nuts / Toolholders
PCB Processing Manual
PCB Fabrication Checklist
Setting Up A PCB Shop
PCB Substrates
Through Holes and Vias
Electroplating
Photoresist and Soldermask
Etching Techniques
Chemical Analysis
PCB Fabrication ChecklistSetting Up A PCB ShopPCB SubstratesThrough Holes and ViasElectroplatingPhotoresist and SoldermaskEtching TechniquesChemical Analysis
Precision Collets for Bosch 1618 and Hitachi Routers
(compatible with Bosch 1617, 1618 & 1619 routers and Hitachi M12VC &KM12VC routers)
Specifications:
- Steel - SUJ 2
- H.R.C. 45-52
- Surface Roughness - Ra 0.5 um
- Internal hole by boring machine
- SG (standard grade) TIR < 0.015 mm (0.0006")
- PG (precision grade) TIR < 0.01 mm (0.0004")
- UP (ultra-precision grade) TIR < 0.005 mm (0.0002")
- Degree of concentricity exceeds the DIN standard. 100% examined
- must be used with InGraph BOPG-1618 nuts and spanner
- Country of Origin - USA
Benefits:
- Low noise operation
- Longer tool life
- More accurate cutting and higher kerf fidelity
- Compatible with carbide microtools
- Low TIR means less wear and tear on spindle bearings
